Improvement of voltage quality

Oct 13, 2025 by recoveryshake.com 89 views

Determining the Optimal Location and Power Capacity of Distributed Generation Mvar Control Type to Reduce Power Losses and Improve Voltage on a 20 kV Distribution Network: A Case Study of TRA 5 GI Tarutung

Introduction

The development of the electricity sector aims to increase the reliability and continuity of the electrical system to meet the growing demands of loads. One of the innovations implemented is the transformation of the distribution system from passive to active with the introduction of Distributed Generation (DG). The presence of DG changes the power flow in the electrical system, requiring optimal determination of the location and capacity of DG to minimize power losses and improve the voltage profile.

Background

The Tarutung TR 5 distribution network is a 20 kV network that serves a significant number of consumers. The network experiences power losses and voltage fluctuations, affecting the quality of electricity services. The application of DG technology has the potential to improve the efficiency and reliability of the electrical system. However, the optimal placement and capacity of DG are crucial to achieve the desired benefits.

Methodology

This study employed the fuzzy logic method with the Sugeno approach to determine the optimal location and power capacity of the MVar Control type DG in the Tarutung TR 5 distribution network. The method used a combination of mathematical calculations and simulations to identify the optimal point for DG placement. The results of the study showed that the optimal placement of DG is on bus 27, with an optimal capacity of 6 MVAR.

Analysis

The application of DG in the electrical distribution system has several benefits, including:

Power loss reduction: With the right placement, power losses in the distribution network can be minimized, improving system efficiency and reducing operational costs.
Improvement of voltage quality: DG placed strategically can help maintain voltage stability at various points on the distribution network, providing better electricity quality to consumers.
Reduction of peak loads: Placement of DG near the load center can reduce pressure on existing network infrastructure, especially at peak consumption, reducing the need for investment in increasing network capacity.

Benefits of Application DG

The application of DG technology in the electrical distribution system offers several benefits, including:

Power loss reduction: With the right placement, power losses in the distribution network can be minimized, improving system efficiency and reducing operational costs.
Improvement of voltage quality: DG placed strategically can help maintain voltage stability at various points on the distribution network, providing better electricity quality to consumers.
Reduction of peak loads: Placement of DG near the load center can reduce pressure on existing network infrastructure, especially at peak consumption, reducing the need for investment in increasing network capacity.

Conclusion

This study demonstrates that with the use of DG technology and proper modeling, the electrical distribution system can be optimized to achieve better performance. The results of this study, which showed a reduction in power losses up to 60.77% with optimal capacity of 6 MVAR on bus 27, provide a clear picture of the potential for increasing efficiency in the electricity distribution system. Therefore, the determination of the optimal location and capacity of DG is crucial to improve the quality of electricity services to the community.

Recommendations

Based on the findings of this study, the following recommendations are made:

Optimization of DG placement: The optimal placement of DG should be determined based on the specific characteristics of the distribution network, including the location of loads and the existing network infrastructure.
Capacity determination: The capacity of DG should be determined based on the optimal placement and the desired level of power loss reduction and voltage improvement.
Monitoring and maintenance: Regular monitoring and maintenance of DG systems are essential to ensure their optimal performance and to identify any potential issues.

Future Research Directions

This study provides a foundation for further research in the area of DG technology and its application in electrical distribution systems. Some potential areas for future research include:

Development of more advanced DG control systems: The development of more advanced DG control systems that can adapt to changing system conditions and optimize DG performance.
Investigation of the impact of DG on system reliability: The investigation of the impact of DG on system reliability and the development of strategies to improve system reliability.
Development of DG-based microgrids: The development of DG-based microgrids that can operate in both grid-connected and islanded modes.

By addressing these research directions, the potential benefits of DG technology can be fully realized, and the electrical distribution system can be optimized to achieve better performance and provide improved electricity services to the community.
Frequently Asked Questions (FAQs) on Determining the Optimal Location and Power Capacity of Distributed Generation Mvar Control Type

Q: What is Distributed Generation (DG) and how does it work?

A: Distributed Generation (DG) is a type of power generation that is located at or near the point of consumption, such as in a building or a neighborhood. DG systems can be connected to the grid or operate in islanded mode, providing power to the local area. The presence of DG changes the power flow in the electrical system, requiring optimal determination of the location and capacity of DG to minimize power losses and improve the voltage profile.

Q: What is the Fuzzy Logic method and how is it used in this study?

A: The Fuzzy Logic method is a mathematical approach that uses fuzzy sets and fuzzy logic to model and analyze complex systems. In this study, the Fuzzy Logic method with the Sugeno approach is used to determine the optimal location and power capacity of the MVar Control type DG in the Tarutung TR 5 distribution network. The method uses a combination of mathematical calculations and simulations to identify the optimal point for DG placement.

Q: What are the benefits of applying DG technology in the electrical distribution system?

A: The application of DG technology in the electrical distribution system offers several benefits, including:

Power loss reduction: With the right placement, power losses in the distribution network can be minimized, improving system efficiency and reducing operational costs.
Improvement of voltage quality: DG placed strategically can help maintain voltage stability at various points on the distribution network, providing better electricity quality to consumers.
Reduction of peak loads: Placement of DG near the load center can reduce pressure on existing network infrastructure, especially at peak consumption, reducing the need for investment in increasing network capacity.

Q: How does the optimal placement of DG affect the power losses in the distribution network?

A: The optimal placement of DG can significantly reduce power losses in the distribution network. By placing DG near the load center, the pressure on existing network infrastructure is reduced, especially at peak consumption. This can lead to a reduction in power losses of up to 60.77%, as shown in this study.

Q: What is the significance of the optimal capacity of 6 MVAR on bus 27?

A: The optimal capacity of 6 MVAR on bus 27 is significant because it represents the optimal placement and capacity of DG that can achieve the desired benefits of power loss reduction and voltage improvement. This capacity is determined based on the specific characteristics of the distribution network and the desired level of power loss reduction and voltage improvement.

Q: What are the implications of this study for the electrical distribution system?

A: This study demonstrates that with the use of DG technology and proper modeling, the electrical distribution system can be optimized to achieve better performance. The results of this study provide a clear picture of the potential for increasing efficiency in the electricity distribution system. Therefore, the determination of the optimal location and capacity of DG is crucial to improve the quality of electricity services to the community.

Q: What are the future research directions in this area?

A: Some potential areas for future research include:

Development of more advanced DG control systems: The development of more advanced DG control systems that can adapt to changing system conditions and optimize DG performance.
Investigation of the impact of DG on system reliability: The investigation of the impact of DG on system reliability and the development of strategies to improve system reliability.
Development of DG-based microgrids: The development of DG-based microgrids that can operate in both grid-connected and islanded modes.